Skip to product information
1 of 3

INMP441 I2S Omnidirectional MEMS Microphone Module

INMP441 I2S Omnidirectional MEMS Microphone Module

SKU:S502006

Regular price Rs. 189.00
Sale price Rs. 189.00 Regular price Rs. 249.00
Sale Sold out
Tax included. 18% GST
Shipping calculated at checkout.

Low stock

INMP441 I2S omnidirectional MEMS microphone module with 24-bit digital output, 61 dBA SNR and 60 Hz–15 kHz response. Works directly with ESP32, Raspberry Pi and STM32 for voice recognition, audio recording and IoT projects.

Need support? Get support here. For Bulk & B2B inquiries, email us at info@silicontechnolabs.in

Total price: ₹0
View full details

INMP441 I2S MEMS microphone module with 24-bit digital output: plugs straight into an ESP32, Raspberry Pi or STM32 for voice and audio projects, with no codec needed.

The INMP441 module is a compact, high-performance omnidirectional MEMS microphone with a digital I2S output. It connects directly to microcontrollers such as the ESP32, Raspberry Pi and STM32 with no external audio codec needed, which makes it a good fit for voice recognition, audio recording, sound-level monitoring and IoT voice projects.

Features

  • Digital I2S interface with 24-bit data output
  • Omnidirectional, bottom-port MEMS microphone
  • High signal-to-noise ratio (61 dBA) and high sensitivity (-26 dBFS)
  • Flat frequency response from 60 Hz to 15 kHz
  • Low current consumption (1.4 mA), high PSR (-75 dBFS)
  • Operating voltage: 1.8 V – 3.3 V
  • L/R pin to select left or right channel, so two modules can share one I2S bus for stereo

Pinout

  • VDD – Power (1.8–3.3 V)
  • GND – Ground
  • SD – Serial data output
  • SCK – Serial clock
  • WS – Word select (L/R clock)
  • L/R – Channel select (GND = left, VDD = right)

Applications

  • ESP32 voice assistants and speech recognition
  • Audio recording and streaming
  • Noise / sound-level meters
  • Smart home and IoT voice control

Package includes

  • 1 x INMP441 I2S MEMS microphone module

Q: Can I use the INMP441 with a 5 V board like the Arduino Uno?
A: The INMP441 runs at 1.8–3.3 V, so connecting it directly to 5 V logic can damage it. For a 5 V system with an I2S interface, use our TXB0104PWR 100Mbps Logic Level Converter Module on the SCK, WS and SD lines. It is fast enough for I2S audio clocks, and its 4 channels cover the microphone signals. Note that the Arduino Uno itself has no I2S hardware, so it cannot read this microphone even with a level converter. For the simplest setup, use an ESP32, Raspberry Pi or STM32, which connect directly at 3.3 V with no converter needed.

Q: Does it give an analog output?
A: No. It outputs 24-bit digital audio over I2S only, so no ADC or amplifier is needed.

Q: Which ESP32 pins should I use?
A: Any free GPIOs can be assigned to SCK, WS and SD in the I2S driver; a common choice is SCK=GPIO14, WS=GPIO15, SD=GPIO32. Tie L/R to GND for the left channel.

Q: Can I record in stereo?
A: Yes. Connect two modules to the same I2S bus, with one L/R pin on GND (left) and the other on VDD (right).

Q: Does it come soldered with headers?
A: Header pins are usually supplied loose and need soldering.

Q: Do you provide a GST invoice?
A: Yes, a GST invoice is provided with every order.

File Name Action
INMP441 Datasheet(PDF) Download